Differences

This shows you the differences between two versions of the page.

--- roach2 [2018/02/10 01:39] – [The ADC boards] jrseti
+++ roach2 [2023/10/28 18:36] (current) – external edit 127.0.0.1
@@ Line 3: / Line 3: @@
 Jack Hickish gave me a Roach2 to try to test.
-===Links===
+==Links==
   * Jack says this is the image to use: acme1:/srv/tftpboot/uboot-roach2/uImage-r2borph3
@@ Line 9: / Line 9: @@
   * [[https://casper.berkeley.edu/wiki/Getting_Started_with_ROACH2]]
   * [[https://casper.berkeley.edu/wiki/ROACH-2_Revision_2]]
+  * [[https://github.com/F5OEO/rpidatv]]
-===The Roach board===
+====The Roach board====
 I pluged in USB to the port labeled "FTDI USB". On my MAC "screen /dev/tty.usbserial-FA1302 115200" started the terminal session.
@@ Line 92: / Line 93: @@
 ====The 2GHz clock====
-I was able pr procure a $35 ADF4351_PLL board, from China, and control it with my Raspberry Pi.
+I was able pr procure a $35 ADF4351_PLL board, from China, and control it with my Raspberry Pi. Here is a picture of the board tuned to 2GHz. This will be used for the clock input of the ADC board. This requires a 10MHz reference signal.
+The controller program is at [[https://github.com/F5OEO/rpidatv]], called adf4351
+To tune it to 2GHz: "./adf4351 2000.0 10000000"
 {{:img_2847_1_.jpg?600|}}