Differences

This shows you the differences between two versions of the page.

--- feed_status [2018/10/23 03:04] – [Feed Sensors] jrseti
+++ feed_status [2023/10/28 18:36] (current) – external edit 127.0.0.1
@@ Line 6: / Line 6: @@
   * [[http://setiquest.info/docs/feed-control-commands.pdf|Feed control commands document]]
   * [[http://setiquest.info/data/antfeeds_measurements-87aa42.zip|Feed control measurements during commissioning]]
+  * [[turbo_pump_procedure|Notes on resetting a turbo pump on 2j]]
 ====Feed Sensors====
@@ Line 11: / Line 12: @@
 The sensors on the dishes and on the feeds are now periodically samples. The values are stored in a MySQL database. There is a duplicate.
-  * Stored locally on sonata@10.1.49.10 (the server called sonata1")
+  * Stored locally on sonata@10.1.49.80 (the server called sonata1")
   * **USING MYSQL WORKBENCH: Stored on a Google Cloud VM instance. The server is user "db", address "35.233.233.72". This instance is available for anyone to perform SELECT commands only. I suggest using MySQL Workbench, available free at https://dev.mysql.com/downloads/file/?id=474219 to view the data.**
@@ Line 17: / Line 18: @@
   * various_sensors - this table contains sensor values from various locations on the dishes. Including the cryotemp. This data is sampled every 5 minutes going back to September 2014.
-  * feed_sensors - this table contains sensor reading from the feed control board and vacuum control board. Basically anything mentioned in http://setiquest.info/docs/feed-control-commands.pdf . Sample rate is every 4 hours.
+  * feed_sensors - this table contains sensor reading from the feed control board and vacuum control board. Basically anything mentioned in http://setiquest.info/docs/feed-control-commands.pdf . Sample rate is every 4 hours. Note: March 17, 2019 the rate was changed to 30 minutes.
 The code and usage documentation is at https://github.com/SETIatHCRO/ATA-Utils/tree/master/FeedSensors